Files:
| File | Size | Last Updated |
Last Downloaded |
|---|---|---|---|
| AM WBs v1.stl | 474.9 KB | 24 Sep 2022 | |
| Gloriana Base A v2.stl | 466.1 KB | 24 Sep 2022 | |
| Heavy Lance Turret A w pin v3.stl | 1.3 MB | 24 Sep 2022 | |
| Heavy Turret Type 3 v1.stl | 126.7 KB | 24 Sep 2022 | |
| Hull_Lower Arcology v1.stl | 223.3 KB | 24 Sep 2022 | |
| Midsection detailing 2 v1 repaired.stl | 12.5 MB | 24 Sep 2022 | |
| Prow detailing 2 v3.stl | 11.7 MB | 24 Sep 2022 | |
| Stb wing detailing 2 v2.stl | 5.8 MB | 24 Sep 2022 | |
| Torpedo bit.stl | 3.5 MB | 24 Sep 2022 | |
| Super Heavy Turret v8.stl | 1.3 MB | 24 Sep 2022 | |
| AM WBs supported.stl | 1.5 MB | 24 Sep 2022 | |
| Heavy Turret Type 3 v1 supported.stl | 806.2 KB | 24 Sep 2022 | |
| Main hull.lys | 11.9 MB | 24 Sep 2022 | |
| Midsection.lys | 7.6 MB | 24 Sep 2022 | |
| Midsection hollwed_supported.stl | 38.8 MB | 24 Sep 2022 | |
| Prow supported.stl | 29.5 MB | 24 Sep 2022 | |
| Super Heavy Turret supported.stl | 3.1 MB | 24 Sep 2022 | |
| Prow.lys | 6.3 MB | 24 Sep 2022 | |
| Torpedo bit and everything else.lys | 5.2 MB | 24 Sep 2022 | |
| Torpedo bit supported.stl | 6.6 MB | 24 Sep 2022 | |
| wings.lys | 5.7 MB | 24 Sep 2022 | |
| Torpedo bit and everything else.stl | 51.2 MB | 24 Sep 2022 | |
| Main hull detailing.stl | 16.5 MB | 24 Sep 2022 | |
| Main hull supported.stl | 68.2 MB | 24 Sep 2022 | |
| Hull_Lower Arcology v2.stl | 225.5 KB | 24 Sep 2022 | |
| Main Engine.stl | 3.1 MB | 24 Sep 2022 | |
| Wing Engine.stl | 2.5 MB | 24 Sep 2022 | |
| Hull_Lower Arcology v1 supported.stl | 44.6 MB | 24 Sep 2022 | |
| Abyss Assembled Drawing v1.pdf | 440.6 KB | 24 Sep 2022 | |
| Hull Drawing v1.pdf | 386.7 KB | 24 Sep 2022 | |
| hans modified lys files.zip | 50.5 MB | 03 Nov 2022 |
A truely massive ship, this is 350 mm in length. Comes equipped with turrets, broadside batteries, hangar bays, torpedoes, and substantial spinal weapons. Multi-part, supported. I recommend slicing the Lychee files to use their hole and hollowing functionality which is what I used on my test piece - it's much more effective than hollowing in mesh. The weapons bays are sized to fit standard Imperial bays. Please note the two assembly PDFs.
Some variant hollowed parts from Hanskrampf have also been included, many thanks to him!
Please note you are not able to redistribute these files nor sell prints of them. These models are not official OPR models and are not recognised by OPR.