These special Gors from the demented collaboration of Quetzalcoatl and Lord Cthulhu ride special discs of power allowing them to scream across the battlefield and wreak havoc on flanks and objective points alike.

Kit is pre-supported.

Intended as proxies for tabletop sci-fi wargames. Not associated or endorsed by any other company or maker.

October Releases are...
Navigator 10/7
Prognosticator ?
Sa'Angar Quetzl-Gors Enlightened ?
Ourk Beastly Boyz ?

Massively powerful psychic mutants who are capable of navigating Chaos Warp Space. Without them the Empire would likely not exist.
They are also capable of destructive and frightening Psychic powers.

Kit builds a House Navigator with several head, weapon and pistol options

Intended as proxies for sci-fi games. Not associated or endorsed by any other company or maker.

Holy Psy-Brain Space priest with sanctified powers and weapons! Not much better to lead your troops to holy war!

Intended as proxies for any sci-fi tabletop battle game you choose.

Not licensed, associated, affiliated, endorsed or encouraged by ANY Game company or Workshop

Decimus Falon rose thru the ranks of the Silver Wardens elite troops by mercilessly and valiantly performing near miracles on the battlefield. Only recently appointed to the highest of ranks, he continues to prove his worth, racking up victory after victory across the embattled empire.

Intended as proxies for any sci-fi tabletop battle game you choose.

Not licensed, associated, affiliated, endorsed or encouraged by ANY Game company or Workshop

Lightly armed fast cruisers such as these are the dashing hussars of the Akkadian shipyards. While fragile in fleet actions they are a terror to pirates and raiders.

These models are around 54 mm long. There are 5 hull variants which can make ships compatible with Battlefleet Gothic, FTL, A Billion Suns, etc.

Please note you are not able to redistribute these files nor sell prints of them. These models are not official OPR models and are not recognised by OPR.

Markedly different to standard bulk haulers, the Akkadian pattern transport focusses on assaulting defended targets and delivering its cargo safely despite opposition. This means it is better armed (although the armament focusses forward), and better defended. This does make them rarer - they won't be found carrying water from place to place!

These models are around 46 mm long. This ship is compatible with games like Battlefleet Gothic, FTL, A Billion Suns, etc.

Please note you are not able to redistribute these files nor sell prints of them. These models are not official OPR models and are not recognised by OPR.

A parts pack for the omnicruiser: A modular cruiser including a variety of aesthetics. A new set of thrusters, a modified main hull, two new prow styles, and a new spine.

These models are around 75 mm in length.

Please note you are not able to redistribute these files nor sell prints of them. These models are not official OPR models and are not recognised by OPR.

Sleek and well armed, these Akkadian cruisers are more than a match for their Imperial counterparts.

These models are around 95 mm long. There are 5 hull variants and 8 wing variants which can make ships compatible with Battlefleet Gothic, FTL, A Billion Suns, etc.

Please note you are not able to redistribute these files nor sell prints of them. These models are not official OPR models and are not recognised by OPR.

Elegant little destroyers, perfect for shredding convoys.

These models are around 30 mm in length and includes 3 variants: cannons, torpedoes, and a big forward cannon.

Please note you are not able to redistribute these files nor sell prints of them. These models are not official OPR models and are not recognised by OPR.

Slow, heavy, ugly, and unable tomove outside its home system. Defence monitors make up for this by being tough and absurdly well armed.

These models are around 50 mm in length.

Please note you are not able to redistribute these files nor sell prints of them. These models are not official OPR models and are not recognised by OPR.

Compatible with the classic tabletop wargame Battlefleet Gothic as Elfdar pirate frigates. Hulls 40 mm in length.

Please note you are not able to redistribute these files nor sell prints of them. These models are not official OPR models and are not recognised by OPR.

Industrial warships for a less civilised time. Small destroyers such as these are commonly used for patrols, scouting, interdiction, and pirate suppression.

These models are around 35 mm in length and includes 3 prow variants and 2 rear variants. Each prow variant has turret, torpedo, and sensor sub-variants.

Please note you are not able to redistribute these files nor sell prints of them. These models are not official OPR models and are not recognised by OPR.

A pack of prows compatible with my Mk. 2 Imperial Battleship to change the aesthetic up a bit and give some more options. The new prow has a slot for a variety of figureheads (including one silly one).

Please note you are not able to redistribute these files nor sell prints of them. These models are not official OPR models and are not recognised by OPR.

Industrial warships for a less civilised time. Light scouting cruisers such as this one are an essential component of fleets.

These models are around 80 mm in length and includes two prow variants and two wing variants.

Please note you are not able to redistribute these files nor sell prints of them. These models are not official OPR models and are not recognised by OPR.

Dark Mech versions of the Alces pattern ships to match the cruiser and light cruiser classes in the BFG Discord's Dark Mech homebrew expansion. Complete models and bits, not currently with supports.

Please note you are not able to redistribute these files nor sell prints of them. These models are not official OPR models and are not recognised by OPR.

Alces pattern light cruisers for your Imperial or Renegade fleets (70 mm in length). Compatible with Mk. 3 or Mk. 4 weapons bays. 3 prow variants (torpedo, heavy cannon, double-prow), and an additional hull variant with integrated weapons batteries.

Please note you are not able to redistribute these files nor sell prints of them. These models are not official OPR models and are not recognised by OPR.

The Space Colonists HLV in 1/3000 or 1/1700 scale is a Heavy Lift Vehicle that can boost several mecha to orbit at once. No weapons to speak of, but the rocket parts are all separate so you can choose what stage of ascent (or descent) you want. While you are free to rescale as you see fit, I've also included presupported versions at the aforementioned scales. Happy printing!

Notes:

1/3000 scale only comes as the capsule or the full assembly, not hollowed. At 1/3000 scale, I can fit multiple aircraft on a single plate on my original Mars 1.

1/1700 scale comes in pieces, pre hollowed with drain holes. The drain holes on the mating surfaces line up with the capsule drain/vernier holes, and pin nicely. At 1/1700 scale, I can just barely squeeze all the parts on to a single Mars build plate.

If you scale it up to 1/400 (4.25x the 1/1700 scale parts), the drain holes enlarge to be the right size to accept 5mm rare earth magnets so you can assemble or disassemble as you see fit. At 1/400 scale, I can just barely squeeze the main capsule onto my Ender 3 FDM printer.

The Space Colonists Purple Cargo Ship in 1/3000 scale is a space ship that can carry several hundred tons of cargo and supplies. No real weapons to speak of, this resupply ship stayed in service for decades. While you are free to rescale as you see fit, I've also included presupported versions at the aforementioned scale. Happy printing!

Notes:
At 1/3000 scale, it fits on my original Mars 1, but if you increase the size to 1/1700 it will require a bigger printer like a Saturn.

The Earth Federation Cargo Ship in 1/3000 scale is a space ship that can carry several hundred tons of supplies. With no real weapons to speak of, towards the end of the war many were retrofit to serve as makeshift mecha carriers. I've included 2 sets of doors, one closed, one in halves. The halves are not symmetrical, and they must be mirrored right to left, so keep track of which is which! Both the original and the Kai refit are included.

While you are free to rescale as you see fit, I've also included presupported versions at the aforementioned scales. Happy printing!

Notes:
At 1/3000 scale, I can fit multiple aircraft on my original Mars 1, and if you increase the size to 1/1700 it will still fit in a Mars 1, so happy printing!