UPDATED 25/08/2022 presupported for resin, scaled to 28mm

presupported for resin, multipart and many options!

UPDATED 25/08/2022 Multipart modular crew builder for the light artillery. presupported for resin

Trained in the martial arts as any Spartanian warrior would be, the Battle Mage takes this prowess to the next level with a mastery of the mystic arts. Battle Mages are able to use this power to weave mighty spells to strike down their enemies. But with this great power comes an extreme risk. Such powers were never meant to be wielded by mortal men, and even the superhuman Spartanians have a difficult time keeping these powers controlled and losing concentration for even a second can lead to disaster. To combat that, Spartanian Artisans have crafted tools and equipment to help Battle Mages contain this power and direct it at the enemy properly.

Fighting a Battle Mage is not only a physical matter but a psychic matter as well. While weaving spells are one of the most notable traits of a Battle Mage, their most employed tactic is invading the minds of their opponents to achieve a variety of effects. Mind control, bouts of madness, and pain are all afflictions that a Battle Mage can inflict on their opponents in battle. Whether their enemies are skewered by spear and sword or blasted apart by raw psychic power, Battle Mages are not to be trifled with!

Model comes presupported!

In times of peace, the Acropolises of Spartanian cities are often crowded to the brim with curious onlookers observed an extremely sacred form of Spartanian combat. Such matters are never fought with sword and shield however, but are instead waged by words of power and persuasion. These warriors of wisdom are known to the populace as Battle Priests. They spend long hours of the day discussing matters of war, philosophy, politics, law and whatever else they fancy at the time. These discussions often evolve into heated debates between two Priests with opposing viewpoints. Such debates are spectacles to behold, as the zeal and passion with which the Priests' argue is inspiring to those around them. No matter how intense such discussions grow, they always end civilly with both Orators being grateful for a chance to hone the art of speech craft. However, when war eventually returns to Spartanian controlled systems, Orators are amongst the first to answer the call.

To say a Battle Priest is mere spokesperson is to ignore the Spartanian upbringing entirely. While they certainly favor the pen compared to the sword, they are still proud sons of Leanidatus and can hold their own in combat with ease. On the battlefield, they turn their skill for passionate discussion into rousing, fiery litanies that inspire their comrades in arms to great feats of heroism.

Model comes presupported

Most of the Star Pharaohs are content with their adopted crystalline divines, the Hexan. They participate in their rituals with enthusiasm, say their incantations with true conviction, and even offer the appropriate sacrifices uncomplainingly. However, there are those few members of the Star Pharaohs who do not trust the Hexan, and who openly defy and mock their directives. The Annihilator caste of Star Pharaohs believe heavily in bodily modification and mind reprogramming in order to separate themselves from their Star Pharaoh brethren as much as possible. That way, if the Hexan ever decide to turn on their metallic worshipers via mass mind control, they would find themselves up against a heavily armed, heavily modified contingent of Star Pharaohs who took great pains not only to to make it difficult to be used for the Hexan's will, but utterly impossible.

The Skorp Annihilators are a unique alliance between both Star Pharaohs and Skorps- the mining droids of Star Pharaoh creation responsible of the bulk of mining and logistics operations in the Miles of Prosperity. The Skorp Annihilators form a chimera of the two beings who are united in their mistrust of the Hexan. Their eight robotic legs skitter so quickly and leap so easily across the surface of planets that it almost appears as if they can fly.

Not all Star Pharaohs are on board with the Hexan's purported plans to free their subjects from programmatic captivity. The Annihilators are a caste of Star Pharaohs who are openly suspicious of the motives of their divine crystalline rulers, and express their frustration with their state of affairs by modifying their bodies for maximum annihilation of alien life rather than for practical applications - so they cannot be used in any of the Hexan's plans. Skittering across the battlefield on three legs, the ferocious Triskelion Annihilators express their loathing for their doomed, ever-captive programming routines via giant swings of terrible and deadly Hexphase blades into the hated alien enemy.

Surprisingly, this state of affairs is fine by the ruling classes of the Star Pharaohs, as even a mad dog can be a friend when directed at one's enemies.

The Blightroot Shade is a proxy for your favorite wraith of the branches!

Files come presupported.

Superbly detailed 28mm/30mm scale model kit conversion parts
Compatible with Redemptor Dreadnought plastic kits (except Easy-to-Build).

Kit contains:
1x Pair of Shoulder Pads (one with tendril attachment)
1x Pair of MechaTendrils
1x Torso insert
1x Torso armour plate
 
IMPORTANT NOTE: You will require a regular Redemptor Dreadnought plastic kit (not supplied) to use this upgrade pack.

you better watch out.

You Better Watch Out.

YOU BETTER WATCH OUT.

He's coming. He's Coming. He's Coming.
_____________________________________________________

Hey Y'all, I bring to you on this fine morning some rad files for a big sneaky fish. So big in fact that if you want something a little closer to stock I'd recommend printing at 80% scale. (Test printed everything both 100% and 80%) The Sneaky drone does not need to be scaled~

This is a massive 35+ piece kit that I hope you enjoy as much as I did, I'm very pleased with the end results~

As always everything is Pre-supported by the lovely Atlas3Dss (And the drones supported by yours truly) The AnglerGeist is Pre-Plated by me for both 2 armed and 4 armed Variants. (the two armed variant will need two of the docked drone files (or undocked I'm not your mom))

Enjoy!

~Pipes

Updated 7/5/22

This is another large kit with a ton of variable configs and with a bit of scaling, almost all of the bits from the Koi mech will work with this and vice versa. 58 pieces total~.

As always presupports by the lovely Atlas3DSS and pre-plated set ups arranged by me based on a PhotonS build plate with plenty of extra room~ The two printed pics are what you can assemble off of the 2Arm and 4Arm config pre-plates respectively, and depending on your config, there will be pieces left over. Other optional pieces will need to be added, give the instructions a look over for help~

Thanks as always for the support,

~Pipes

Lil' guppy's swimmin around the tank~ Blastin anything they see with rockets and heavy weapons fire...wait, that's not right...These aren't guppies at all???

These are the support guppies for the TriggerFish Heavy Grav Tank, as well as general use, mix and match~
Supported filesets will be available here when I get them back from Atlas.

~Pipes

These are older filesets and their age shows. they're not really as compatible as future releases, and are best considered legacy kits.

And I swear, that fish got in the dandiest little suit, and hopped up out of the tank. Went right on down to the recruiters that day and enlisted.
_________________________________

Included in this kit are pieces to make both 2 and 4 armed variants. All on the arm mounts are slotted for 1/16"x1/16" magnets for easy magnetization, no need to choose~
As my suits tend to run a little bit larger then Stock, if you want this suit to be something closer to that, you can scale the plates down by 80%. Just remember to scale any of the weapons down by that amount as well. (I've printed multiple plates at both scales, but scale files at your own discretion~ This also would require the magnet sizes to be adjusted as well.)

As always, all my kits are supported by the lovely Atlas3Dss. With the Base suit pre-plates for both 2 and 4 arm configs being set up by me based around a PhotonS build plate for convenience~

Thanks,
~Pipes

hind·sight

/ˈhīn(d)ˌsīt/ noun

Understanding of a situation or event only after it has happened or developed.

"with hindsight, I should never have gone"
_________________________________

Included in this multipart kit are pieces to make both 2 and 4 armed variants of C.Hindsight. A large variety of swords and hand placements for all sorts of dynamic poses. Huge amount of variety with this one~

As my suits tend to run a little bit larger then Stock, if you want this suit to be something closer to that, you can scale the plates down by 95%. Just remember to scale any of the weapons down by that amount as well. (I've printed multiple plates at both scales, but scale files at your own discretion~ 

As always, all my kits are supported by the lovely Atlas3Dss. With the Base suit pre-plates for both 2 and 4 arm configs being set up by me based around a PhotonS build plate for convenience~

-Pipes

Weaving in and out of the battlefield to a symphony only they can hear, leaving small scale devastation in there wake. Ever graceful, never breaking stride.

_________________________________

Hey friends~! Today I bring to the table the Koi Battle Mech. The closest prototype we have to production, and the most numerous~

This kit has been another fun set to work on, and I think I crammed enough stuff in it to keep you all busy for at least a little bit~ There are so many different ways and configs that this mech can be assembled in, from 2 arm to 4 arm undermount overmount side mount etc. etc.~ I'm very pleased with the final piece and I thin ki've really kinda hit a stride in terms of design~ I really hope you enjoy this one!

As always presupports by the lovely Atlas3DSS and pre-plated set ups arranged by me based on a PhotonS build plate with plenty of extra room~ The two printed pics are what you can assemble off of the 2Arm and 4Arm config pre-plates respectively, and depending on your config, there will be pieces left over. Other optional pieces will need to be added, give the instructions a look over for help~

Thanks as always for the support,

~Pipes

EDIT (2/13/22): I have updated the Koi's shoulder joints to be more in line with the current commander kit.
~Pipes

Lionfish are real pretty, but they pack a nasty sting.
Did you know that they're also super invasive?
Really a hazardous fish~

_________________________________

While this suit was specifically designed with 4 arms in mind, It can be built with two arms. If you're into that kinda heresy.

Included in this kit are pieces to make both 2 and 4 armed variants. All on the weapon mounts are slotted for 3mmx1mm (approximate) magnets for easy magnetization, no need to choose~

As my suits tend to run a little bit larger then Stock, if you want this suit to be something closer to that, you can scale the plates down by 90-95%. Just remember to scale any of the weapons down by that amount as well. (I've printed multiple plates at both scales, but scale files at your own discretion~ This also would require the magnet sizes to be adjusted as well.)

As always, all my kits are supported by the lovely Atlas3Dss. With the Base suit pre-plates for both 2 and 4 arm configs being set up by me based around a PhotonS build plate for convenience~

-Pipes