Iron Lord Base pack (walking version)

Edit : 2022-04-02 : added Whip weapon

With the successful introduction of the Calappa series drones, development on the 'Koma pattern started almost immediately with the age old question of "What if it were bigger?"

This is a koi equivalent quad drone that I put together for anyone wanting both a quad mech, and a drone equivalent to the koi. I think this scratches both itches, and has a fair amount of customization, from a handful of heads, to 3 or 4 leg variants, there should be a bit of everything from the koi here. (there's even an adapter that lets you use the lower half of the 'koma, and the upper half of the koi together in Quad mech harmony~
Supported by the lovely atlas, I didn't preplate this as there are a bunch of optional pieces to choose, and it's overall assembly is fairly straightforward~

I hope you have fun with this one, I had a good time building mine,
~Pipes

presupported for resin, scales to 28mm heroic. as seen in images

tank commanders, presupported for resin printing, for use with your favourite wargames

Vehemence, the most rage filled of the Madness Demons is a beautiful centerpiece for your tabletop games.

All parts are pre-supported and include Lychee files. Some larger parts may require you to make holes using your slicer software, in the larger parts in order for drainage, if you are not slicing the files in the Lychee software. Please make note that if drain holes are not made the model will crack.

This model includes the scenic base shown provided by Crucible of Games patreon.

Models are scaled for 28mm gaming. They have been scaled to my preferences and re-scaling may be required to fit your particular needs.

Private Use Only Non Commercial No Derivatives NOTE: Do not under any circumstances share these files for free or commercially!

Set of 5 Hooded Heads to go with your Corsairs of the Black Kraken!

All files come presupported!

BUL-ORKS BIKERS GOTTA GO FAST

It is no secret that the Star Pharaohs have made a bold claim in the galaxy: that all Hexcite in existence belongs to them and them alone, and the opinions the hated alien may have of their temporary Hexcite stewardship is about as valuable as the alien's own lives, that is, not at all.

In order to make good on this claim, the Star Pharaohs have to secure territory, supply lines, and transport coherence as they extract the precious Hexcite from various parts of the galaxy and funnel it all back to the Miles. A key component in this vast trans-galactic network of exploitation is the Khopesh Kruiser, the fearsome flying machine that moves through punishing atmospheres and excessive gravity with the same ease it moves through the vacuum of space. In a pinch it can be fitted with a portal for warping troops directly from the Miles, in case the Hexcite supply lines need some ground-based security.

The Khopesh Kruiser is completely symmetrical - you can mirror the parts labeled "Right" or "Left" in your slicer to eliminate the need for excessive support. It requires 6 wing claws, which are each identical.

This is 'Big Boss in Mecha Suit Armor' He is the leader of a great host of Orcs and believes himself to be a prophet of their Gods! He'll crush anyone who gets in his way under his armored feet, or tear them limb from limb with his claw and sword.

These models are designed for use in 32mm miniature table top games. 

Included are 1 unique sculpt of 'Big Boss in Mecha Suit Armor' (multi-part.)

All models come with a presupported version included.

The Orc Big Boss of War charges into battle crushing anyone he encounters with his huge claw, even his own orcs if they don't krump hard enough! He always has his trusty pet squaggle at his side 'Mr Bitey'

These models are designed for use in 32mm miniature table top games. 

Included are 1 unique sculpt of an Orc Big Boss of War (multi-part, multiple head, arm and weapon options) as well as 1 Squaggle.

All models come with a presupported version included.

This is 'Big Boss on Shark Beastie' He leads his clan of Orc-lantians on to land to crush anyone who stands in their way! He shares a deep bond with his Mecha-Shark Beastie- When his Beastie lots its right eyes he gouged out his own in solidarity with his companion.

These models are designed for use in 32mm miniature table top games. 

Included are 1 unique sculpt of a 'Big Boss on Shark Beastie' (multi-part.)

All models come with a presupported version included.

This is Doctor Orctopus an insane Mechanic Boss who grafted four mechanical arms directly to his spine. Then he put lasers on them! He also hates spiders.

These models are designed for use in 32mm miniature table top games. 

Included are 1 unique sculpt of a Dr Orctopus Mechanic Boss (multi-part.)

All models come with a presupported version included.

These Flame Boys are complete pyromaniacs. They roam the battlefield setting everything around them on fire.

These are 32mm sculpts designed for tabletop miniature wargames.

The set includes 6 unique Flame Boy sculpts, and 2 unique Mechanic Boy poses.

All files come with presupported versions included as well.

These are some military style Gunna Boys. They love nothing more than to get the biggest gun they can find and go out and pull the trigger until all the ammo's gone.

These models are designed for use in 32mm miniature table top games. 

Included are 11 unique sculpts of Gunna Boys, as well as 1 Gunna Boss

All models come with a presupported version included.

This is 'Ninja Goblin' He is the sneakiest, most cunning, and deadliest Goblin ever to live. When a Big Boss needs someone dead'ed they call him- And just hope he doesn't dead them first!

These models are designed for use in 32mm miniature table top games. 

Included are 1 unique sculpt of a Ninja Goblin (multi-part.)

All models come with a presupported version included.

This is 'Skully Da' Bike Boss' He takes his sweet customized bike and rips across the battlefield, don't try to run, he's too fast!

These models are designed for use in 32mm miniature table top games. 

Included are 1 unique sculpt of a Bike Boss (multi-part, multiple head options) 

All models come with a presupported version included.

These are some crazy Rambo style Orcs for your futuristic themed greenskin army! They come with 7 unique presupported models. Including a Nob. they are scaled to table top 32mm games with the models being 35mm themselves.

I have test printed the models successfully myself but as with all presupports your results may vary