The Federation Enclave's Missile Drones are extremely adaptable and capable of even defending the Mobile Suits they are assigned to with powerful shield generators, just like the ones on their smaller cousins. This set comes with all the parts necessary to assemble Missile Ball Drones with their weapons Open or Closed and even in the process of launch, with optional arm styles to give your drones some variety on the battlefield including Shield Generator arms to make a Shielded Missile Drone Proxy. Drones may be mounted on standard miniature flight stands via a predesigned 1/8 inch hole in the bottom of the model.

All parts are presupported and include Lychee files.

Models are scaled for 28mm gaming. They have been scaled to my preferences and re-scaling may be required to fit your particular needs.

Private Use Only Non Commercial No Derivatives NOTE: Do not under any circumstances share these files for free or commercially!

multipart underground digging warriors set

All of the holdover pieces from the Narwhal are in the Narwhal Pieces folder, this includes things like the Main Barrels/Energy Capacitors/Etc

The Orca is a beastly kit at almost 100 pieces to the kit and around 100+ pieces per assembly general assembly. Not including supports or hollowing, each Orca is around 450-500ml or resin as an estimate from Lychee. It is big, and I've rendered it alongside some of my previous mecha (The OG Narwhal, Koi (who is just happy to be here), Sturgeon, and Watchmen Gobies for scale reference. Not Included with the Orca Kit.) I'm honestly quite proud of the final with all the ways it can be built which are too numerous for me to render out. Not shown are the underarm mounts for the sub weapons/missiles, and a few other bits and bobs.

I know I say every time that I'm excited to see what folks will do with this one, but I am really excited to see what folks do with this kit, be it scaling up or down, mixing and matching.
~Pipes

A series of bits to convert your popular 28-32mm Science Fiction powered armored infantry like Battle Bros or Prime Bros to the Epione Mecha. This set comes with replacement shoulders, a replacement head, a backpack, articulated wing mounts and articulated wings. All of these bits fit traditional and newer, bigger powered armored infantry. All parts come pre-supported, and the shoulders and wings are symmetrical (so no need to mirror), but the wing mounts are not symmetrical.

The Space Colonists Purple Plane in 1/3000 scale is atmospheric transport plane with that can carry several mecha at once. With two twin cannons, space for 3 mecha, and a front and back door, what more could you ask for? While you are free to rescale as you see fit, I've also included presupported versions at the aforementioned scales. Happy printing!

Notes:
At 1/3000 scale, I can fit multiple aircraft on my original Mars 1, and if you increase the size to 1/1700 it will still fit in a Mars 1, so happy printing!

I've included two versions - one with higher smoothing and face count, one with reduced. Some slicers were having trouble with the high res one, so this should help.

presupported modular infantry builder!

modular presupported miniature kit

The War Dog Heavy Battle Suit stands over 5 inches tall and is a perfect proxy for heavily armed elite battle suits in your favorite tabletop games. This set comes with 36 parts to make two variations and endless Poses for your Battle suits.

All parts are presupported and include Lychee files.

Models are scaled for 28mm gaming. They have been scaled to my preferences and re-scaling may be required to fit your particular needs.

Private Use Only Non Commercial No Derivatives NOTE: Do not under any circumstances share these files for free or commercially!

A proxy for Falchion-class Frigates for the classic tabletop wargame Battlefleet Gothic.

Note you are not able to redistribute these files nor sell prints of them.

A series of bits to convert your popular 28-32mm Science Fiction mechanized boxy Walking Coffin Robots to Earth Federation Artillery Mecha. This set comes with a head, shoulder cover, shoulder/bicep, lower arm missile launchers, base, treads, shoulder artillery cannons and cannon mounts. Most parts are side specific, so mirror all parts that you want two of. All parts come pre-supported. Depending on your printer, you may be able to press fit many of the parts (although I still recommend gluing for long term stability).

There's a solid +/- 45° twist at the waist (before the dreadnought chassis hits the frame), full ball joint articulation for the bopp missile hands, 0-90° abduction in the shoulders, with separate cap for full twist.  You can go about 20-25° before the slot becomes visible, too.  This is still a printed resin miniature joint, so it'll need glued in position once you find a sweet pose.  The cannon mounts have 2 flat spots for 0 and 20° elevation. Perfect for customizing your Battle Brother Attack Walkers!

A series of bits to convert your popular 28-32mm Science Fiction heavy powered armored infantry to Flying Green Saucer Mecha. This set comes with replacement shoulders and a replacement head. All of these bits fit traditional and newer, bigger heavy powered armored infantry; such as Battle Brother Destroyers and Prime Brothers Aggro Squads. All parts come pre-supported, and the shoulders are not symmetrical so you will need to mirror for the left side.

Ancient Elfdar medium armour for 6/8 mm wargames. These can be used to proxy as Wave Serpents, Falcons, Fire Prisms, and Firestorms. The hull is about 50 mm long. The tanks are made up of the main hull, a chin gun, and a turret. There are two hull variants and four turrets. Now supported and print tested!

Please note that you are not able to sell prints of nor redistribute these files. These models are not official OPR models and are not recognised by OPR.

2023-05-10 - I've added a revised Cloud Petrel turret with a MUCH better laser inspired by KaeEbonrai

Collaboration Statuette between me and my bud Gearguts.
You can find more of Geargut's models here, as well as the actual kit for this Orky mech. Consider giving him a look as his stuff's pretty rad!
https://www.patreon.com/Geargutz
https://geargutsmekshop.com/

~Pipes

A modular cruiser including a variety of aesthetics. Different thrusters, main hulls, wings (compatible with the standard main hull only), prows, and bridges, built around a common spine.

These models are around 75 mm in length.

The latest version of my weapons bays are also included.

Please note you are not able to redistribute these files nor sell prints of them. These models are not official OPR models and are not recognised by OPR.