multipart, modular, presupported

35% off all STLs if you're an active Patreon!

The body of an industrial crane in 00 scale. This was patterned from one of the cranes to be found on the Bristol Docks at Prince's Wharf. A few compromises were made for printability (I can't stand how incredibly fragile some scale models are). Supported, test printed, and ready to lift!

Please note you are not able to redistribute these files nor sell prints of them.

The Autonomous Spider Drone is a multipart kit containing 3 different leg and arm styles to allow you to make some very dynamic poses for your tabletop armies.

All parts are pre-supported, test printed and include Lychee files. Test prints done on my Photon Mono X that is regularly maintained and tuned. Supports are for your convenience only, and may need to be adjusted for your printer type, choice of resin, environment, and printer maintenance.

These models are not meant to be shared or resold without the express permission of the designer. Any resale or sharing of these files are expressly forbidden.

Models are scaled for 28mm gaming. They have been scaled to my preferences and re-scaling may be required to fit your particular desires.

Corydoras are a kind of catfish and that's funny to me in particular reference to this mech xD
Same spiel as I usually give, most, if not all of this kit is compatible with the previous goby kits as well as the Odonata kits. I think some pieces might need to be scaled down a bit to look right on the gobies in particular though, so experiment a bit there, it should yield some neat mixes. There are a lower halves that have sockets for the tails, and two and four socket upper torsos. Held rifle poses, reloading poses, pistols arms, tail inserts, etc. etc.~
There should be a decent amount of variety here, and everything rendered here was made with the pieces shown in the bits spread~

~Pipes

Dark Mech versions of the Alces pattern ships to match the cruiser and light cruiser classes in the BFG Discord's Dark Mech homebrew expansion. Complete models and bits, not currently with supports.

Please note you are not able to redistribute these files nor sell prints of them. These models are not official OPR models and are not recognised by OPR.

UPDATE January 7th 2023 : added a pair of missing chelicera

The Mermaid Battlesuit is a great command suit scaled model, perfect for your 2pi tabletop armies. The suit comes with part to allow you to make the Mermaid suit either with it's bit shield or bit armor on. This macha is very details and extremely posable, with many tiny parts.

All parts are pre-supported, test printed and include Lychee files. Test prints done on my Photon Mono X that is regularly maintained and tuned. Supports are for your convenience only, and may need to be adjusted for your printer type, choice of resin, environment, and printer maintenance.

These models are not meant to be shared or resold without the express permission of the designer. Any resale or sharing of these files are expressly forbidden.

Models are scaled for 28mm gaming. They have been scaled to my preferences and re-scaling may be required to fit your particular desires

All parts now uploaded! Assembly guide now included.

The Hi Def Space Colonists Green Cruiser in 1/400 scale is a main attack cruiser with great mobile mecha support. With three twin main cannons, space for 4 mecha in the rear bay, and space for 2 more in the forward escape shuttle, this cruiser comes ready to battle. While you are free to rescale as you see fit, I've broken this into parts that will (mostly) comfortably fit on most small resin printers. Compatible with the Space Colonist Green Shuttle, not included.

Additionally, a 1-1700 scale combined version is also included. Due to the file size of the combined ship, it and the supported version have been broken into split .zip files. 7-Zip has a Combine feature that you can use to put them back together before unzipping.

Notes:

This model is designed to have a wall thickness of ~5mm wherever possible. Everything except the turrets currently print without any supports at all, and everything should press fit pretty nicely (although you should plan on gluing it for long term stability, especially the engine pylons).

The turrets and sockets on the spine have recessed rings for 8mm diameter x 3mm thick magnets for rotational articulation, and there's spots for 3mm diameter x 2mm thick magnets for the turret top and shaft to allow up and down articulation.

The engine nacelle was the only part that I couldn't fit on a smaller resin printer in one piece, so there's two options. The Port Nacelle is a single part, and if it fits on your printer then just mirror it for the Starboard side. If it doesn't fit, just mirror the 4 Starboard Nacelle parts for the Port side instead.

The pylons are hollow and I strongly recommend reinforcing rods from the hangar to the nacelles. At 1/400, the top of the pylons have clearance for a 3x4mm square rod at the leading edge and a 16x4mm rod at the trailing edge (mostly determined by the hangar connection). If you want to light it and run wires to the nacelles, there's plenty of room in the channels for wiring.

The 1/400 scale shuttle ( https://www.comicsgamesandthings.com/shop/product/space-colonist-green-shuttle/ ) will fit the front end.

multipart modular builder, presupported for resin

multipart modular builder. presupported for resin