A series of bits to convert your popular 28-32mm Science Fiction powered armored infantry like Battle Bros to Fully Armed Lightning Mecha. This set comes with replacement shoulders, a replacement head, a backpack, shoulder cannon, a missile box with open and closed doors, and fuel tanks. All of these bits fit traditional and newer, bigger powered armored infantry. All parts come pre-supported, and the shoulders and fuel tanks are symmetrical (so no need to mirror).

Update 12/01/2022: Now with a full set of gear! Twin beam rifle, arm missiles, shields and shield arms galore.

A series of bits to convert your popular 28-32mm Science Fiction powered armored infantry like Battle Bros or Prime Bros to the Epione Mecha. This set comes with replacement shoulders, a replacement head, a backpack, articulated wing mounts and articulated wings. All of these bits fit traditional and newer, bigger powered armored infantry. All parts come pre-supported, and the shoulders and wings are symmetrical (so no need to mirror), but the wing mounts are not symmetrical.

The Space Colonists Purple Plane in 1/3000 scale is atmospheric transport plane with that can carry several mecha at once. With two twin cannons, space for 3 mecha, and a front and back door, what more could you ask for? While you are free to rescale as you see fit, I've also included presupported versions at the aforementioned scales. Happy printing!

Notes:
At 1/3000 scale, I can fit multiple aircraft on my original Mars 1, and if you increase the size to 1/1700 it will still fit in a Mars 1, so happy printing!

I've included two versions - one with higher smoothing and face count, one with reduced. Some slicers were having trouble with the high res one, so this should help.

A series of bits to convert your popular 28-32mm Science Fiction mechanized boxy Walking Coffin Robots to Earth Federation Artillery Mecha. This set comes with a head, shoulder cover, shoulder/bicep, lower arm missile launchers, base, treads, shoulder artillery cannons and cannon mounts. Most parts are side specific, so mirror all parts that you want two of. All parts come pre-supported. Depending on your printer, you may be able to press fit many of the parts (although I still recommend gluing for long term stability).

There's a solid +/- 45° twist at the waist (before the dreadnought chassis hits the frame), full ball joint articulation for the bopp missile hands, 0-90° abduction in the shoulders, with separate cap for full twist.  You can go about 20-25° before the slot becomes visible, too.  This is still a printed resin miniature joint, so it'll need glued in position once you find a sweet pose.  The cannon mounts have 2 flat spots for 0 and 20° elevation. Perfect for customizing your Battle Brother Attack Walkers!

A series of bits to convert your popular 28-32mm Science Fiction heavy powered armored infantry to Flying Green Saucer Mecha. This set comes with replacement shoulders and a replacement head. All of these bits fit traditional and newer, bigger heavy powered armored infantry; such as Battle Brother Destroyers and Prime Brothers Aggro Squads. All parts come pre-supported, and the shoulders are not symmetrical so you will need to mirror for the left side.

The Space Colonists Green Shuttle in 1/400 scale is a orbital drop shuttle with room for two giant mecha. This is the shuttle from the Space Colonists Green Cruiser, just bigger and more detailed! While you are free to rescale as you see fit, I've also included presupported versions at the aforementioned scales. Happy printing!

Notes:
The Green Shuttle comes in a few assembly options: solid, split and hollowed, and split with opened engines and an open mecha bay. At 1/400 scale, I can fit either half just barely on my original Mars 1, and if you increase the size to 1/144, each half would just barely fit in a Jupiter! So scale carefully, my friends.

If you'd prefer 1:144 in FDM, the Komusai is split into 7 parts that should print quite nicely on any Ender 3 sized printer.

The Space Colonists Red Carrier in 1/3000 scale is a dedicated carrier ship with heavy firepower to back it up. With two triple beam cannons, a huge array of CIWS, and hangar space for up to 8 mecha in the forward bay, this carrier comes ready to battle. While you are free to rescale as you see fit, I've also included presupported versions at the aforementioned scale. Happy printing!

Notes:
The Red Carrier comes in with a main hull and separate turret guns in two elevations (0° and 10°). The turret guns and mounting points have magnet holes pre-cut into the files (3mm x 2mm, or 1/8" x 1/16"). The main hull comes with a half circle peg that fits the small ship base from space Armada based games (which clips off easily). At 1/3000 scale, I can fit 2 assembled ships on my original Mars 1, and if you increase the size to 1/1700 it just barely won't fit the Mars 1, but it does fit my Proxima 6.0, so happy printing!

A series of bits to convert your popular 28-32mm Science Fiction mechanized Contemptuous Walking Coffin Robots to UN Space Force Dread Mecha, the Spartan. Some have taken to calling it a Dread'Mech, an Archer. This set comes with closed missile shoulder covers, replacement legs (separate thigh, shin, and foot, articulated), and replacement arms (compatible with kit arm connectors, open and closed fists). All parts are side specific, so mirror all parts that you want two of. All parts come pre-supported.

The Earth Federation Heavy Cruiser in 1/3000 scale is a heavily armed attack cruiser with lots of turrets. With two twin heavy beam cannons, 5 twin beam cannons, and 14 twin-barrel point defense turrets, this cruiser comes ready to bring the house down. While you are free to rescale as you see fit, I've also included presupported versions at the aforementioned scales. Happy printing!

Notes:
The Heavy Cruiser comes in a few assembly options - namely, assembled or disassembled. The main hull comes with a half circle peg that fits the small ship base from space Armada based games (which clips off easily). At 1/3000 scale, I can fit 2 assembled ships on my original Mars 1 (barely), and if you increase the size to 1/1700 you'll definitely need a Saturn sized print bed, so happy printing!

The Space Colonist Attack Fighter in 1/144 is a fast fighter craft that fares poorly against giant robots. Two light vulcan guns backed up by six tube rocket pods make it a dangerous harassing unit. While you are free to rescale as you see fit, I've also included presupported versions at the aforementioned scale. Happy printing!

Notes:
The presupported Attack Fighter fits tightly on my original Mars 1, and if you increase the size to 1/100 you'll need a bigger printer!

A series of Heavy Weapon bits to convert your popular 28-32mm Science Fiction powered armored infantry. This set comes with 3 different kinds of bazookas, a shoulder mounted cannon, and a heavy shoulder shield. All of these bits fit traditional and newer, bigger powered armored infantry. All parts come pre-supported.

A series of bits to convert your popular 28-32mm Science Fiction powered armored infantry to Gelled Goon Mecha. This set comes with replacement shoulders (they are symmetrical, so no need to mirror), a replacement head, and a shield. All of these bits fit traditional and newer, bigger powered armored infantry. All parts come pre-supported.

A series of bits to convert your popular 28-32mm Science Fiction mechanized Contemptuous Walking Coffin Robots to UN Space Force Dread Mecha, the Tomahawk. Some have taken to calling it a Dread'Mech, a Warhammer. This set comes with open missile shoulder covers, a spotlight and shoulder missile box that plug into the back of the shoulder covers, a head, replacement legs (separate thigh, shin, and foot, articulated), and replacement cannons (compatible with kit arm connectors). All parts are side specific, so mirror all parts that you want two of. All parts come pre-supported.

The Earth Alliance Light Fighter in 1/144 is a fast fighter craft that fares poorly against giant robots. Four nose machine guns backed up by hidden rockets make it a dangerous harassing unit. While you are free to rescale as you see fit, I've also included presupported versions at the aforementioned scale. Happy printing!

Notes:
The presupported Light Fighter fits tightly on my original Mars 1, and if you increase the size to 1/100 you'll need a bigger printer!

I included two versions - one with in-scale wings, one with thickened wings. The scaled wings printed fine, but were really fragile, so I made a sturdier version as well.

Update 2022-07-05:

I updated the ventral hull to include the forward landing gear panel lines. I then opened up the landing gear bays and the missile bay, so those modes are also available to print. Sorry for the miss!

The Earth Federation Light Cruiser in 1/3000 scale is an attack cruiser with lots of turrets. With six main beam cannons, six point defense turrets, and two missile turrets, this cruiser comes ready to battle. While you are free to rescale as you see fit, I've also included presupported versions at the aforementioned scales. Happy printing!

Notes:
The Light Cruiser comes in a few assembly options - namely, assembled or disassembled. The main hull comes with a half circle peg that fits the small ship base from space Armada based games (which clips off easily). At 1/3000 scale, I can fit 5 assembled ships on my original Mars 1, and if you increase the size to 1/1700 it will still fit in a Mars 1, so happy printing!

A series of bits to convert your popular 28-32mm Science Fiction mechanized suits of battle to Earth Federation Mass Produced Ground Mecha. This set comes with replacement shoulders, backpack, head, shin plates, and feet. All parts are symmetric, so mirror or not as you choose. There are two small circular attachment points you'll need to clip off of your battle suit to make the backpack press fit, but all other parts simply attach or replace kit parts. All parts will come pre-supported soon.

A series of bits to convert your popular 28-32mm Science Fiction powered armored infantry to Dominating Mecha. This set comes with replacement shoulders and a replacement head. All of these bits fit traditional chonky and newer, bigger, chonkier powered armored infantry. All parts come pre-supported.

More bits for your Space Colonists! A series of bits to convert your popular 28-32mm Science Fiction powered armored infantry with new mecha smashing devices. This set comes with a heat ax, a heat saber, a custom heat saber, and a dominating heat saber. All of these bits fit traditional and newer, bigger powered armored infantry. All parts come pre-supported, both with and without an attached hand.

The Earth Federation Core Attacker gets a boost with the Booster! This heavy fighter/bomber in 1/144 takes the escape craft for giant mecha and turns it into a deadly machine. Four nose machine guns are now supplemented with two beam cannons and a whole lot of rockets. While you are free to rescale as you see fit, I've also included presupported versions at the aforementioned scales. Happy printing!

Notes:

This comes in two parts - the booster and the folded Core Attacker. The presupported booster fits very tightly on my original Mars 1, and if you increase the size to 1/100 it will not lol

I've presupported and hollowed out the booster, it's a big chunk of resin either way.

A series of bits to convert your popular 28-32mm Science Fiction powered armored infantry to Ground Specialist Mecha. This set comes with replacement spikey shoulders (they are symmetrical, so no need to mirror), a replacement head, and a shield (in two sizes). All of these bits fit traditional and newer, bigger powered armored infantry. All parts come pre-supported.