Just a little community inspired kit I threw together to go along with the PufferFish Drone.

What you see is basically what you get, super simple, just for fun kinda mech~
Presupported by Atlas3DSS, tested by both them and me, no need for repairing any of the files.

I've had punchBot for all of a few days and I love them.
~Pipes

PLEASE make sure you do not already own the products within. If you were a Patron for the months of February2023_Corydora StrikeTeam and January2023_CorydoraScoutFrame Base kit then you already have the models in this set. Do not buy them twice!

Pack containing all of the Corydora and related filesets

This is a little Light drone set to go along with the Corydora Scouting unit. It's a lot more monopose then my usual stuff, but they are just, really small. Please take care when de-supporting as some of the pieces are on the more fragile side.

As a disclaimer, I will not be able to test print the supported files until the 9th of feb 2023. I don't imagine anything not assembling, but just so it's known. I'll remove this disclaimer once things are tested.
~Pipes

This is a multipart kit to go alongside the Corydora as a medium weapons platform. A bunch of different options to build a few variants, and a couple dynamic pre-poses~

As a disclaimer, I will not be able to test print the supported files until the 9th of feb 2023. I don't imagine anything not assembling, but just so it's known. I'll remove this disclaimer once things are tested.

This is the strike team add on kit for the base Corydora Scouting frame. It adds a bunch of weapon options to build and pre-poses to build a formidable strike team unit.
This is a multipart kit that includes all of the pieces to print a corydora strike team. While you do not need the original corydora kit to build this strike team, you will not be able to make the base corydora with this kit.
Some of the pieces in this kit will require a bit of care when de-supporting.
~Pipes

Corydoras are a kind of catfish and that's funny to me in particular reference to this mech xD
Same spiel as I usually give, most, if not all of this kit is compatible with the previous goby kits as well as the Odonata kits. I think some pieces might need to be scaled down a bit to look right on the gobies in particular though, so experiment a bit there, it should yield some neat mixes. There are a lower halves that have sockets for the tails, and two and four socket upper torsos. Held rifle poses, reloading poses, pistols arms, tail inserts, etc. etc.~
There should be a decent amount of variety here, and everything rendered here was made with the pieces shown in the bits spread~

~Pipes

This pack should include all the components for the different assemblies for the Cichlid grav tank (Cichlid/TriggerFish/Fugi)
(This does not include the Heavy 'Koma, it's just the only render I have on hand with all three tanks)
~Pipes

This is the full version of the kit available in the Welcome pack. It's still pretty much WYSIWYG but it's got a handful of sword and torso options to mix it up a bit. Plays very well with the melee pack I released alongside it.

~Pipes

Do not attempt to download the overarching folder for the supported files, the zip archives inside need to be downloaded separately.

This is a bit of a hard pack to go through, it's really just me modeling out a bunch of melee weapons to kinda unwind from the bigger kits. This is easily one of the most...self indulgent sets that I've done with some pretty large biases towards the more absurd. That said while a lot of the pack falls in line with that theme of things, there's a lot of utility in some off the updated/added bits. For instance, I've finally added some generic auxiliary arms for holding weapons/sheaths/etc. There's also a ball jointed version of each style of arm for the Koi/Mako/Commander, because at the end of the day, it's just more poseable then a single jointed elbow. This includes undermounts, and a shield post lower arm as well, (you can see all of these bits in the main bits spread image.) All the generic undermount weapons now have a version that allows for the attachment of a shield if you're so inclined, and I've added a handful of previous and tweaked shields.

I tried to include a render of most of the main weapons assembled and posed, but there's really just, a lot xD just like the parts count which is around 200 this time x'D
As is usually the case, supported files for this will be added once I get them.
This kit is scaled to the commander, but should be scaling compatible with most of the other its that have a socketed hand joint with some scaling. (there's a rough guide for that in the kit)

There's a lot of utility here, and I'm excited to see what people do with this. I don't think this will be the last time I do something like this as it seems that it's been received pretty well, which makes me incredibly happy to say the least~
I might actually paint a mini or two from this one xD

(I've rendered the poses with the HindsightV.2 kit (not included in this pack))
~Pipes

I'm on time this month xD with the Odonata class Aerial Combat Mech. I've rendered here a few angles on the overall bits spread, a group render and a couple singles to try and showcase some of the variance in the kit. Everything here should be cross compatible with the previous Goby kits, so if for whatever reason you vibe more with the Goby then the Odonata, you can mix and match to make your perfect lil 'guys. I've also included a few bases with stands for these guys, but I definitely recommend using a 2mm or similar acrylic rod for these. These stands magnet to the included bases with a 5x1 or a 5x2mm magnet. Like the previous (mostly) preposed kits, there will be a t-posed version of the Odonata available in case you want to do your own posing. I didn't think this would have as many bits as it currently does but that's just the way things go sometimes xD

I look forward to seeing what gets made with these, as I had a lot of fun modeling something a bit more out there.
~Pipes

All of the holdover pieces from the Narwhal are in the Narwhal Pieces folder, this includes things like the Main Barrels/Energy Capacitors/Etc

The Orca is a beastly kit at almost 100 pieces to the kit and around 100+ pieces per assembly general assembly. Not including supports or hollowing, each Orca is around 450-500ml or resin as an estimate from Lychee. It is big, and I've rendered it alongside some of my previous mecha (The OG Narwhal, Koi (who is just happy to be here), Sturgeon, and Watchmen Gobies for scale reference. Not Included with the Orca Kit.) I'm honestly quite proud of the final with all the ways it can be built which are too numerous for me to render out. Not shown are the underarm mounts for the sub weapons/missiles, and a few other bits and bobs.

I know I say every time that I'm excited to see what folks will do with this one, but I am really excited to see what folks do with this kit, be it scaling up or down, mixing and matching.
~Pipes

Collaboration Statuette between me and my bud Gearguts.
You can find more of Geargut's models here, as well as the actual kit for this Orky mech. Consider giving him a look as his stuff's pretty rad!
https://www.patreon.com/Geargutz
https://geargutsmekshop.com/

~Pipes

DISCLAIMER: Some pieces on this kit fit a bit tightly initially and require a little bit of work to mesh properly. This is mostly with the interaction between the engines and body joint and a few of the wing inserts, some light sanding, or in the engine's case, a few rotations will clear out the slot~

That said, the StoneFish multi-role flier is a multi part vehicle kit to assemble various versions in a bomber or fighter config as well as accompanying escort drones.
PreSupported by Atlas3DSS and the base is preplated by me.
~Pipes

The Mako Class Assault Mech. Equipped to handle most *hazards* in the field.
This is a fairly chunky 60ish piece kit, and can be assembled in a ton of different ways and combinations. As in the koi kit and the possibilities abound~
Almost all of the main pieces and weapons are interchangeable with the Koi class mech (no part scaling needed)

Once I get the pre-supports tested I'll be adding them up as usual. As always pre-supports are done by the lovely Atlas3DSS, and pre-plated files are set up by me.
I hope you enjoy this one, and I'm excited to see what kind of combos you all can come up with.
~Pipes

The Betta class light skimmer drone's come to rumble. A fairly customizable platform and a rude set of weapon options make the Betta skimmer as scrappy as its namesake.
Also included is the Plakat class Monowheel. equally as versatile as the Betta platform, the monowheel is primarily a light scouting vehicle able to be outfitted for mild confrontations.

It took me a little bit to refine the design to a place where I was content with it, and the more I sit with it, the more customizable options I realize can be made with this one. It's almost like adding on more kits opens more possibilities or something. Everything is ball jointed and so with scaling works with most of the previous kits. I'm excited to see what kinda stuff you all can cook up~

~Pipes

Here to help all your Goby frames find religion. Robot Religion.

I have wanted to do a mech that incorporates the aesthetic of the hagoromo almost for as long as I've been working on this project and I finally go to x'D This is also the first time that I've actively tried to get fusion360 to do cloth.

All parts are compatible with the previous two goby kits (with the exception that the Cardinal body (front or back) might have some issues with some of the existing Fronts/backpacks.

Presupported by Atlas as always, I've separated each pose to its own individual folder, you only need to add the body/head/and whichever back you want to use. I tried to make everything work regardless of the backpack, but poses like the Wukong one just look better with the 6 arms (imho)

That said I am really pleased with how these came out and the poses I got with 'em. And I'm excited to see 'em painted up~
~Pipes

(Do not try to download this all at once, it will fail. Download each section individually.)

(Do not repair the files with Lychee it will cause bits to not print/fail. Lychee really doesn't like the legs for whatever reason. I've test printed everything in lychee without reparing the files and beenn 100% fine in doing so. I've tested everything unrepaired and had no issues.)

Finally, the craving to build a massive amount of drones can be quelled~ The Guppies have gone under a bit of a makeover, combining both the aesthetics of the originals and the Calappas into one highly customizable kit~ With options for land and air, and various purposes, you can assemble quite the drone force, and with a few bits that work with previous releases (Cichlid frame grav tank and the gobies) so much can be done, and I can't wait to see what kinda cool things you all can come up with~

As always supported by the lovely Atlas3DSS, no preplates for this one as there's just too much variation, so I'll leave that up to you guys.
(Currently waiting on a set of pre-posed terrestrial legs that I put together at the last minute, I will update this fileset once I get those back and tested)

~Pipes

Have you ever really wanted to be,
A total rebel flipping tanks on the enemy?

Did you ever try to further improve,
How fast you punch Chapter Masters through the roof?

Was there ever any certain time,
When you thought brute force and style combine?

I guess now it's time to shine,
GrabbyHands are here.

This is an upgrade set for the Commander frame and Koi mech kits~ It is just the Arms. You still need the CommanderFrame/KoiKit for this.
~Pipes

(Do not try to download this all at once, it will fail. Download each section individually.)

(Do not repair the files with Lychee it will cause bits to not print/fail. Lychee really doesn't like the legs for whatever reason. I've test printed everything in lychee without reparing the files and beenn 100% fine in doing so. I've tested everything unrepaired and had no issues.)

These are the Watchman variant Goby Frame scouting drones. A further iteration of me not being able to model organics. There's 100+ bits and oh so many combinations. A little bit more pre-posed then my usual stuff but at this scale it's what makes the most sense. and as always, two and four arm variants.
The undermount pieces are slotted for a 1mm magnet but at this scale they might need to drilled out a bit to fit. I haven't tested that as I don't personally intend to magnetize them

I really hope you enjoy this kit. Between this and the Firefish Goby variant there is a ton of possibility for completely customized units~
~Pipes