Following from the success of the modified aegis drone project, the Lance drone was developed to fill the ranged roll of a fully autonomous land based weapons frame. Built upon the Aegis model, the Lance removes the heavy armour and powered fists for a more stable frame and up to two weapons mounts.

This kit contains everything you need to make the Lance drone. It comes with 3 set poses for easy building but the legs and arms can all be mixed for more options. A variety of shoulder pads, weapons, bits and heads offer further customisation.

Base: 50mm round

Condensed in size and sealed against the vacume of space, the Warden Void Type was designed to take the dependable Warden frame and adapt it to specialise in space combat, particularly boarding actions. Up armoured and reduced in size, they have proven invaluable on the battlefield above.

This kit contains everything you need to make ther Warden: Void type. It comes with 3 pre-posed legs for easy building, a variety of armour build options, modular weapons and loads of cross compatability with the rest of the Warden line and more!

Base: 50mm round

The New Expansion uses AI across every facet of its culture, industry and military. The Host platforms to these AI can vary from tiny camera drones to towering monoliths of arms, claws and sensors. The majority are however small and agile. Performing tasks too dificult or too dangerous for those with only one life.

This kit contains everything you need to make a huge variety of drones for the New Expansion. It is a completely modular kit so while some basic builds and bits pairings will be shown, please take your time to create your own!

Base: (variable) and wire advised for flying drones.

The Scourge is a suit designed to operate in small groups or as a lone wolf. Advanced stealth tech allows for the surprisingly large frame to melt into the background while its heavy armaments are enough to turn almost anything to hot slag, be it the cockpit of a titan or a cluster of infantry. The heavy boosters then allow the suit to disengage before it is pinpointed.

This kit contains everything you need to make either the Type 1 or Type 2 Scourge suit.

It comes professionally pre-supported and with a bunch of customisation options. It also includes posed legs and arms to help with building.

Magnets: 3:1mm 

Base: 105 x 70mm oval

The Scourge is a suit designed to operate in small groups or as a lone wolf. Advanced stealth tech allows for the surprisingly large frame to melt into the background while its heavy armaments are enough to turn almost anything to hot slag, be it the cockpit of a titan or a cluster of infantry. The heavy boosters then allow the suit to disengage before it is pinpointed.

This kit contains everything you need to make either the Type 1 or Type 2 Scourge suit.

It comes professionally pre-supported and with a bunch of customisation options. It also includes posed legs and arms to help with building.

Magnets: 3:1mm 

Base: 105 x 70mm oval

The Aractra Tri walkers are piloted by small three legged xenos, the Aractra. To make up for their small form they have leveraged their ability for advanced mechanics and construction processes. They craft agile and flexible suits which they pilot into battle and are comparable in role to the Warden suit.

This kit contains everything you need to make the Aractra Tri walker. It comes professionally pre-supported and with a bunch of customisation options. It also includes a bunch of optional posed legs to help with building and some easy magnitisation.

It also comes with the free addons of the suit and basic bits packs for more options!

Magnets: 3:1mm

Recommended Base: 50mm round

The Bulwark is a heavily armoured and well armed artillery and heavy support suit. Designed to host a variety of different heavy weapons in a range of configurations. Most notable are the Rail guns and Heavy missile block which can make short work of both heavy armour and infantry.

This kit contains everything you need to make the Bulwark armoured suit. It comes professionally pre-supported and with a bunch of customisation options. It also includes 3 optional posed legs to help with building and an array of magnetisation points.

Magnets: 3x1mm round

Base: 60mm round

Contains:

- One Warden combat suit
- One Decar engineer
- One grumpy drone
- One Overseer drone
- One Minelaying drone
- One Maglock drone

The Raze is a walking fortress, dropped from the skies by landers, its designed to take even the largest of enemies head on. Thick armour and support systems protect the pilots from incoming fire while advanced optics and spotter drones help coodinate the array of weaponry at the Raze’s disposal. A titan level suit, few things can match its pure destructive might on the battlefield.

This kit contains everything you need to make the Raze Suit. It comes professionally pre-supported and with a bunch of customisation options. It also includes a pair of optional posed legs to help with building and an array of magnetisation points.

Magnets: 3:1mm and 5x2 mm

Base: 170mm oval

The garrison is a multi purpose, heavy engineering, repair and recovery suit developed from the Bulwark frame. It can be equipped with a range of “non lethal” equipment or combined with parts from other suit lines to make a heavy weapons platform in a pinch.

This kit contains everything you need to make the Garrison Suit as well as extra bits for basing and a bunch of unique drones. It comes professionally pre-supported and with a bunch of customisation options. It also includes 2 pre-posed leg options for ease of building.

Base: 60mm round

The Decar are an amphibian like race with short squat bodies and powerful legs. They have an affinity for humid and boggy terrain. However their masks allow them to fight in almost any environement. They use technology to augment their vision, making them particularly good sharp shooters and are most often employed on the front line as dedicated infantry.

This kit contains everything you need to make a variety of Decar infantry squads. It comes professionally pre-supported and with a bunch of options for customisation.

Recommended base: 25mm round

Expanding on the classic Warden frame, the experimental type is a platform developed to test out new weapons and protection systems. New incorperated heavy weaponry and armour increase both the suits lethality and durability.

This kit contains everything you need to make the Warden suit: experimental type. It comes professionally pre-supported and with a bunch of customisation options. It also includes 3 pre-posed leg options for ease of building.

Base: 50-60mm round

This kit contains everything from both the Command suit:Ascendant type and Command suit:Executioner type kits. 

This is for those who want both kits for maximum customisability at a cheaper price. 

Also comes with some brand new instructions to help you handle all the bits!

Light and more durable then standard tactical armour, and with additional thrusters for traversing difficult terrain, the Spectre is perfect for vanguard missions and ambushes. The stealth fields incorperated into the suits allowing them to stalk the battlefield unseen.

This kit contains everything you need to make the Spectre Stealth Suit. It comes pre-supported and with a bunch of optional heads and poses. It also includes a homing beacon drone.

The poses shown are a guide but most parts can be swapped out as much as you want!

Base: 32mm round

The Falchion War walker is a huge manouverable gun platform, able to traverse the most difficult of terrain while laying down fire support.

It come with its own approx 210mm round base, Pins in the legs for easy posing and with a bunch of extra bits to customise the build

Unique heads commissioned by members of my community! Join to get them in a free pack.

This Kit contains ALL the bits from both the Warden kit, Urban type and posed kit. If you buy this you don't need to get those kits!

Versatile and tough, able to be equipped with a range of weaponry and equipment for varying combat roles, the Warden is the backbone of the New expansions military.

This kit contains everything you need to make the Warden combat suit. The suit can be built as either a base warden or the Urban type. The kit also comes with 9 pre posed legs for easy poses. It comes pre-supported and prepared for magnetisation on a range of hardpoints. (3mm x 1mm)

The Executioner is a command suit developed for those who prefer a more direct approach to battle. Thick armour protects the pilot and critical systems while the advanced suit allows for complete control of the battlefield as well as a brutal level of combat proficiency unmatched in any other suit, save the Ascendant.

Recommended 60mm round base