Age of Apocalypse alt costume Colossus figure - Colossus himself is 220mm tall. With base total height is 260mm

Ever think your Battle Bros needed some more spikey bits? Need a new look for biomechanical monstrosities? Look no further! Dark Army (or Death Army) grunts are here to serve your needs. A series of bits to convert your popular 28-32mm Science Fiction powered armored infantry like Battle Bros or or Prime Bros to a Dark Army grunt, this set comes with a head, shoulder, spikey wrist bangles, and a spikey beam rifle that doubles as a handy club. All of these bits fit traditional and newer, bigger powered armored infantry. Shoulders and wrist spikes are symmetrical, so just print two of each.

A series of parts to upgrade your old 1/144 scale Merry Army Heavy Grunt kits! This set comes with replacement shoulders (with a sliding gimmick to reveal the shoulder missiles), a replacement head, and a twin chaingun. The shoulders also come with alternate parts that will fit the new high grade Organization of the Zodiac Lion Mecha!

A series of bits to convert your popular 28-32mm Science Fiction powered armored infantry like Battle Bros, Prime Bros, or Custodian Bros to a Zodiac Alliance Genie Mecha. This set comes with replacement shoulders, a replacement head, and an articulated backpack. The pack thrusters can swivel up to 60°, and the outer armoring can slide to accommodate the pack.

A modular kit to make scenery for model railways or wargames 1:76 scale and larger. Based upon the M-Shed in Bristol. Comprises doors and frames to make a two-story building with side-walls (with and without windows) and stairs to connect along the side. Some components will require mirroring. An assembled example file is included to give some guidance. The roof, so far as I can tell, is flat so I would just use some card/plasticard. This model is designed for filament printing, generally printing each component flat to the bed on its back, with minimal supports for bridges and overhangs.

Please note you are not able to redistribute these files nor sell prints of them.

The Earth Federation Space Fighter is a dedicated space craft with massive fuel tanks and missile reserves. This fighter in 1/144 has separated missile launcher/boosters. While you are free to rescale as you see fit, I've also included presupported versions at the aforementioned scale. Happy printing!

Notes:

The 1/144 comes in 4 parts - the main body of the fighter, then the 4 boosters (which are all identical, two are mirrored). The presupported fighter parts fit easily on my Saturn 2, but not on smaller printers.

Ever get that feeling that your grunts could use a little heavy support? Now's your chance! The 1-144 GM Cannon conversion kit takes the1-144 HGUC GM kit (HGUC-20) and turns up the ordnance. Much like the description in MSV, these conversion parts either clamp on existing kit parts or replace them. The leg armor clamps on top of the kit leg and ankle armor, allowing for a good range of foot motion, but notably shifting the center of mass downwards for a more stable firing platform. The waist armor replaces the kit front armor, and has the option to be glued in place as per the original MSV, or given some articulation. The torso armor replaces the kit upper torso parts, with a minor modification of the lower torso parts (clipping the protruding pegs). As the GM Cannon has a variety of barrels in the different depictions, 3 different cannon barrels are available. The cannon itself has a range of motion of +25° / -15°, offering a lot of posing possibilities. The head antennae may be the trickiest to align, so be sure to use a slow acting glue. The left side chest vent has a part available, or you can use the kit part as you choose.

While these parts typically press fit and articulate where needed, gluing is always recommended for long term posing, as frequent repositioning starts wearing the resin down quite quickly. Additionally, depending on your printer tolerances, you may need to adjust a few parts by filing edges.

Standing 6 and half inches tall and showing off all her upgrades, the Catari sergeant is a perfect display piece to show of your love of... cyborgs, cat girls, prosthetics?

I hope you enjoy this model as much as I enjoyed making it.

All parts are presupported and include Lychee files and supported STL files for other slicers.

The Earth Federation Jet Booster uses the front end of the Core Attacker to shorten the development cycle! This bomber in 1/144 or 1/400 takes the escape craft for giant mecha and turns it into a deadly machine. Four nose machine guns are now supplemented with a single cannon and a separate smart bomb. While you are free to rescale as you see fit, I've also included presupported versions at the aforementioned scales. Happy printing!

Notes:

The 1/144 comes in 10 parts - the main body of the booster, then the core attacker nose, the two wings, two canards, two tail fins, bomb attachment, and smart bomb. The presupported booster parts fit easily on my original Mars 1. The 1.400 is a single, combined part.

The Earth Federation Cargo Plane in 1/400 scale is a heavy aircraft that can carry several tons of supplies. There are a pair of anti-aircraft guns, and the cargo box can be assembled closed or opened.

While you are free to rescale as you see fit, I've also included presupported files at the aforementioned scale. Happy printing!

Notes:
At 1/400 scale, each part fits comfortably on my Voxelab Proxima 6.0, and scaled up to 1/144 all the parts fit in an Ender 3 build volume, so happy printing!

A series of bits to convert your popular 28-32mm Science Fiction powered armored heavy infantry to Merry Army Heavy Grunts! This set comes with replacement shoulders (with a sliding gimmick to reveal the shoulder missiles), a replacement head, and a twin chaingun. All of these bits fit traditional and newer, bigger powered armored infantry (like Heavy Prime Bros or Battle Bro Destroyers). All parts come pre-supported, and the shoulders are symmetrical so no need to mirror.

Bitz to convert your popular 28-32mm powered armor models into an Organization of the Zodiac Lion Ground Mecha! Includes Head, Shoulder Armor, Shield, Beam Saber Hand, Beam Pistol (colony type) hand, Beam Rifle (colony type) hand, and Machine Gun Hand. Both supported and unsupported versions included. Perfect for your Battle Bros or Prime Bros.

Notes:

The shoulder armor pieces are symmetrical, so no need to mirror.

Also note - these are just the Bitz to convert Marine models into the Lion. Bodies not included!

EDIT 2022/12/08: Updated all hand weapons to use a new hand and higher resolution. Shoulders also received improved resolution!

Please do not share or sell these files. If you do not have a printer, please either check my Shapeways shop or contact me, we can work something out :)

Bitz to convert your popular 28-32mm powered armor models into an Organization of the Zodiac Lion Space Mecha! Includes Head, Space Shoulder Armor, Shield, Beam Saber Hand, Beam Pistol (Space type) hand, Beam Rifle (Space Type) hand, and Space Type Backpack. Both supported and unsupported versions included. Perfect for your Battle Bros or Prime Bros.

Notes:

The shoulder armor pieces are symmetrical, so no need to mirror.

Also note - these are just the Bitz to convert Marine models into the Lion Space Type. Bodies not included!

EDIT 2022/12/08 - Updated all hand weapons to use a new hand and higher resolution. Shoulders and backpack also received improved resolution!

Please do not share or sell these files. If you do not have a printer, please either check my Shapeways shop or contact me, we can work something out :)

The Space Colonists HLV in 1/3000 or 1/1700 scale is a Heavy Lift Vehicle that can boost several mecha to orbit at once. No weapons to speak of, but the rocket parts are all separate so you can choose what stage of ascent (or descent) you want. While you are free to rescale as you see fit, I've also included presupported versions at the aforementioned scales. Happy printing!

Notes:

1/3000 scale only comes as the capsule or the full assembly, not hollowed. At 1/3000 scale, I can fit multiple aircraft on a single plate on my original Mars 1.

1/1700 scale comes in pieces, pre hollowed with drain holes. The drain holes on the mating surfaces line up with the capsule drain/vernier holes, and pin nicely. At 1/1700 scale, I can just barely squeeze all the parts on to a single Mars build plate.

If you scale it up to 1/400 (4.25x the 1/1700 scale parts), the drain holes enlarge to be the right size to accept 5mm rare earth magnets so you can assemble or disassemble as you see fit. At 1/400 scale, I can just barely squeeze the main capsule onto my Ender 3 FDM printer.

The Space Colonists Purple Cargo Ship in 1/3000 scale is a space ship that can carry several hundred tons of cargo and supplies. No real weapons to speak of, this resupply ship stayed in service for decades. While you are free to rescale as you see fit, I've also included presupported versions at the aforementioned scale. Happy printing!

Notes:
At 1/3000 scale, it fits on my original Mars 1, but if you increase the size to 1/1700 it will require a bigger printer like a Saturn.

The Space Colonists Purple Plane in 1/3000 scale is atmospheric transport plane with that can carry several mecha at once. With two twin cannons, space for 3 mecha, and a front and back door, what more could you ask for? While you are free to rescale as you see fit, I've also included presupported versions at the aforementioned scales. Happy printing!

Notes:
At 1/3000 scale, I can fit multiple aircraft on my original Mars 1, and if you increase the size to 1/1700 it will still fit in a Mars 1, so happy printing!

I've included two versions - one with higher smoothing and face count, one with reduced. Some slicers were having trouble with the high res one, so this should help.

The Earth Alliance Light Fighter in 1/144 is a fast fighter craft that fares poorly against giant robots. Four nose machine guns backed up by hidden rockets make it a dangerous harassing unit. While you are free to rescale as you see fit, I've also included presupported versions at the aforementioned scale. Happy printing!

Notes:
The presupported Light Fighter fits tightly on my original Mars 1, and if you increase the size to 1/100 you'll need a bigger printer!

I included two versions - one with in-scale wings, one with thickened wings. The scaled wings printed fine, but were really fragile, so I made a sturdier version as well.

Update 2022-07-05:

I updated the ventral hull to include the forward landing gear panel lines. I then opened up the landing gear bays and the missile bay, so those modes are also available to print. Sorry for the miss!

The Earth Federation Light Cruiser in 1/3000 scale is an attack cruiser with lots of turrets. With six main beam cannons, six point defense turrets, and two missile turrets, this cruiser comes ready to battle. While you are free to rescale as you see fit, I've also included presupported versions at the aforementioned scales. Happy printing!

Notes:
The Light Cruiser comes in a few assembly options - namely, assembled or disassembled. The main hull comes with a half circle peg that fits the small ship base from space Armada based games (which clips off easily). At 1/3000 scale, I can fit 5 assembled ships on my original Mars 1, and if you increase the size to 1/1700 it will still fit in a Mars 1, so happy printing!