A small attack frigate for the marines (40 mm in length).

Please note you are not able to redistribute these files nor sell prints of them. These models are not official OPR models and are not recognised by OPR.

A truely massive ship, this is 350 mm in length. Comes equipped with turrets, broadside batteries, hangar bays, torpedoes, and substantial spinal weapons. Multi-part, supported. I recommend slicing the Lychee files to use their hole and hollowing functionality which is what I used on my test piece - it's much more effective than hollowing in mesh. The weapons bays are sized to fit standard Imperial bays. Please note the two assembly PDFs.

Some variant hollowed parts from Hanskrampf have also been included, many thanks to him!

Please note you are not able to redistribute these files nor sell prints of them. These models are not official OPR models and are not recognised by OPR.

The Space Colonists Purple Plane in 1/3000 scale is atmospheric transport plane with that can carry several mecha at once. With two twin cannons, space for 3 mecha, and a front and back door, what more could you ask for? While you are free to rescale as you see fit, I've also included presupported versions at the aforementioned scales. Happy printing!

Notes:
At 1/3000 scale, I can fit multiple aircraft on my original Mars 1, and if you increase the size to 1/1700 it will still fit in a Mars 1, so happy printing!

I've included two versions - one with higher smoothing and face count, one with reduced. Some slicers were having trouble with the high res one, so this should help.

A modular cruiser including a variety of aesthetics. Different thrusters, main hulls, wings (compatible with the standard main hull only), prows, and bridges, built around a common spine.

These models are around 75 mm in length.

The latest version of my weapons bays are also included.

Please note you are not able to redistribute these files nor sell prints of them. These models are not official OPR models and are not recognised by OPR.

The Space Colonists Green Shuttle in 1/400 scale is a orbital drop shuttle with room for two giant mecha. This is the shuttle from the Space Colonists Green Cruiser, just bigger and more detailed! While you are free to rescale as you see fit, I've also included presupported versions at the aforementioned scales. Happy printing!

Notes:
The Green Shuttle comes in a few assembly options: solid, split and hollowed, and split with opened engines and an open mecha bay. At 1/400 scale, I can fit either half just barely on my original Mars 1, and if you increase the size to 1/144, each half would just barely fit in a Jupiter! So scale carefully, my friends.

If you'd prefer 1:144 in FDM, the Komusai is split into 7 parts that should print quite nicely on any Ender 3 sized printer.

The Space Colonists Red Carrier in 1/3000 scale is a dedicated carrier ship with heavy firepower to back it up. With two triple beam cannons, a huge array of CIWS, and hangar space for up to 8 mecha in the forward bay, this carrier comes ready to battle. While you are free to rescale as you see fit, I've also included presupported versions at the aforementioned scale. Happy printing!

Notes:
The Red Carrier comes in with a main hull and separate turret guns in two elevations (0° and 10°). The turret guns and mounting points have magnet holes pre-cut into the files (3mm x 2mm, or 1/8" x 1/16"). The main hull comes with a half circle peg that fits the small ship base from space Armada based games (which clips off easily). At 1/3000 scale, I can fit 2 assembled ships on my original Mars 1, and if you increase the size to 1/1700 it just barely won't fit the Mars 1, but it does fit my Proxima 6.0, so happy printing!

The Earth Federation Heavy Cruiser in 1/3000 scale is a heavily armed attack cruiser with lots of turrets. With two twin heavy beam cannons, 5 twin beam cannons, and 14 twin-barrel point defense turrets, this cruiser comes ready to bring the house down. While you are free to rescale as you see fit, I've also included presupported versions at the aforementioned scales. Happy printing!

Notes:
The Heavy Cruiser comes in a few assembly options - namely, assembled or disassembled. The main hull comes with a half circle peg that fits the small ship base from space Armada based games (which clips off easily). At 1/3000 scale, I can fit 2 assembled ships on my original Mars 1 (barely), and if you increase the size to 1/1700 you'll definitely need a Saturn sized print bed, so happy printing!

Industrial warships for a less civilised time.

These models are around 120 mm in length and include modular bays and prows. Plain and torpedo prow variants are included, which can mount a chin gun or ram. Note the assembly instructions!

The latest version of my weapons bays are also included.

Please note you are not able to redistribute these files nor sell prints of them. These models are not official OPR models and are not recognised by OPR.

The Earth Federation Light Cruiser in 1/3000 scale is an attack cruiser with lots of turrets. With six main beam cannons, six point defense turrets, and two missile turrets, this cruiser comes ready to battle. While you are free to rescale as you see fit, I've also included presupported versions at the aforementioned scales. Happy printing!

Notes:
The Light Cruiser comes in a few assembly options - namely, assembled or disassembled. The main hull comes with a half circle peg that fits the small ship base from space Armada based games (which clips off easily). At 1/3000 scale, I can fit 5 assembled ships on my original Mars 1, and if you increase the size to 1/1700 it will still fit in a Mars 1, so happy printing!

Industrial warships for a less civilised time. One of my oldest models, updated for current manufacturing methods.

These models are around 75 mm in length and include modular bays and prows.

The latest version of my weapons bays are also included.

Please note you are not able to redistribute these files nor sell prints of them. These models are not official OPR models and are not recognised by OPR.

2022-08-17 - Updated the supported hull files after some warping was brought to my attention

The Earth Federation Core Attacker gets a boost with the Booster! This heavy fighter/bomber in 1/144 takes the escape craft for giant mecha and turns it into a deadly machine. Four nose machine guns are now supplemented with two beam cannons and a whole lot of rockets. While you are free to rescale as you see fit, I've also included presupported versions at the aforementioned scales. Happy printing!

Notes:

This comes in two parts - the booster and the folded Core Attacker. The presupported booster fits very tightly on my original Mars 1, and if you increase the size to 1/100 it will not lol

I've presupported and hollowed out the booster, it's a big chunk of resin either way.

Industrial warships for a less civilised time. One of my oldest models, updated for current manufacturing methods.

These models are around 100 mm in length and include modular bays and prows.

The latest version of my weapons bays are also included.

Please note you are not able to redistribute these files nor sell prints of them. These models are not official OPR models and are not recognised by OPR.

The Alces-pattern battleships are ancient vessels with long and storied pasts. Many turned and fought against the false empire although their numbers are gradually dwindling.

These models are around 120 mm in length and include modular bays and prows (2 variants). The main hull and one of the prows can be printed flat to the plate (indeed they are designed to be), either you can use elephant's foot compensation or shave off the foot around the joins as indicated. The other parts are supported as per usual. There are also two unsupported assembled versions - I make no guarantee in printing success, these models really weren't designed to be printed in one piece.

The latest version of my weapons bays are also included. Also as a bonus I've included the heavy cannon turret and some more "imperial" style weapons bays to create an imperial version.

Please note you are not able to redistribute these files nor sell prints of them. These models are not official OPR models and are not recognised by OPR.

Suitable in size and armament to be a stand in for a strike cruiser for the classic tabletop wargame Battlefleet Gothic. This version has some of the detail bulked out, and the addition of torpedo and cannon prows.

Please note you are not able to redistribute these files nor sell prints of them. These models are not official OPR models and are not recognised by OPR.

A proxy for a Haven Spire (an elf space station) for starship combat games. Smooth and hex-pattern sails, two types of "prow". It is 120 mm tall and 60 mm in diameter.

Please note you are not able to redistribute or sell prints of these files. These models are not official OPR models and are not recognised by OPR.

Escorts for Space Dwarfs, 45 mm in length. Two types: with and without a missile silo.

Please note you are not able to sell prints of these files nor redistribute them. These models are not official OPR models and are not recognised by OPR.

A grand cruiser for my Ancient Elfdar. It's about 110 mm long, and armed with two types of gun battery, lances, and a small launch bay.

Please note you are not able to redistribute or sell prints of these files. These models are not official OPR models and are not recognised by OPR.

Imperial transports, based upon late 19th/early 20th Century warships. Bulk hauler and two types of tank, plain and supported files. These are small transport sized, so about 42 mm in length.

Please note that you are not able to sell prints of these files nor redistribute them. These models are not official OPR models and are not recognised by OPR.

An Ancient Elfdar Transport based upon the ancient concept sketches for Space Fleet.

These will proxy in BFG for a standard transport.

Please note that you are not able to sell prints of these files. These models are not official OPR models and are not recognised by OPR.

These are based off the really old concept sketches for the Space Fleet models. Contains a battleship, cruiser, light cruiser, large escort, small escort, and a small freighter. Now also includes ordnance models.

These will proxy in BFG for Edgy Space Elves or Crafty Space Elves. And maybe one day there will be specific rules! Or you could just play Space Fleet ;)

Please note that you are not able to sell prints of these files. These models are not official OPR models and are not recognised by OPR.

2022-03-07 - Updated the supports on Escort 2, especially around the tip of the prow to make them a little more robust, the new versions are r02. Let me know if there are any issues.