Small Bunker & Modular Decking

28mm presupported miniature for resin, 5 weapon options

These are based off the really old concept sketches for the Space Fleet models. Contains a battleship, cruiser, light cruiser, large escort, small escort, and a small freighter. Now also includes ordnance models.

These will proxy in BFG for Edgy Space Elves or Crafty Space Elves. And maybe one day there will be specific rules! Or you could just play Space Fleet ;)

Please note that you are not able to sell prints of these files. These models are not official OPR models and are not recognised by OPR.

2022-03-07 - Updated the supports on Escort 2, especially around the tip of the prow to make them a little more robust, the new versions are r02. Let me know if there are any issues.

These are based off the really old concept sketches for the Space Fleet models. This is battleship sized (~130 mm long). Supported and plain files.

These will proxy in BFG for a Wyrm. And maybe one day there will be specific rules! Or you could just play Space Fleet ;)

Please note that you are not able to sell prints of these files. These models are not official OPR models and are not recognised by OPR.

These are based off the really old concept sketchs for the Space Fleet models. This is cruiser sized (~90 mm long), and comes with several different weapons fits: Torpedo tubes, lances, or launch chutes. Supported and plain files.

These will proxy in BFG for Dragonships for the Batteries/Torps, and Batteries/Launch bay sets. And maybe one day there will be specific rules! Or you could just play Space Fleet ;)

Please note that you are not able to sell prints of these files. These models are not official OPR models and are not recognised by OPR.

2021-10-17 - Revised the sails to make them thicker and also tweaked the supports on the very bottom of the hulls after my test prints.

These are based off the really old concept sketches for the Space Fleet models. This is escort sized (~40 mm long), and comes with several different weapons fits: Torpedo tubes, lances, or a assault module nose. Supported and plain files.

The mesh is a bit manky, let me know if it's coming out in the print. I'll update it if/when Autodesk fixes the issue.

These will proxy in BFG for Shadowhunters, or for Corsair class escorts. And maybe one day there will be specific rules! Or you could just play Space Fleet ;)

Please note that you are not able to sell prints of these files. These models are not official OPR models and are not recognised by OPR.

2021-12-04 - Big shout out to DoubleBaseFanatic who has test printed and re-supported these for transparent resins which are much more fussy about support proximity.

These are based off the really old concept sketches for the Space Fleet models. This is escort sized (~70 mm long but that's mostly tail). Supported and plain files.

Please note you are not able to sell prints of these files or redistribute them. These models are not official OPR models and are not recognised by OPR.

2022-03-07 - Updated the supports, especially around the tip of the prow to make them a little more robust, the new versions are r02. Let me know if there are any issues.

These are based off a really old concept sketch for the Space Fleet models. This is light cruiser sized (~70 mm long), and comes with several different weapons fits: Torpedo tubes, a spinal lance, or launch chutes. Supported and plain files.

These will proxy for Wraithships for the Batteries/Torps and Batteries/Launch bay sets. And maybe one day there will be specific rules!

Please note that you are not able to sell prints of these files. These models are not official OPR models and are not recognised by OPR.

2021-12-31 - Had a request for a version with no cannons but a combination of torpedoes and lances. Added an unsupported version (can't do supports at the moment)

These are based off the really old concept sketches for the Space Fleet models. This is transport sized (~40 mm long). Supported and plain files.

These will proxy in BFG for a standard transport.

Please note that you are not able to sell prints of these files. These models are not official OPR models and are not recognised by OPR.

2021-12-22 - In my personal print the engine nacelles didn't come out properly, I've added even more supports. Also thickened up the edges of the forward hull near the engine nacelles as these were too thin on my print.

The Old Overpharaoh is an ancient, haggard, tried-and-true commander of the Star Pharaohs. He's purged more victories from his memory banks than battles most other Overpharaohs have even fought. Previously he had been enjoying retirement in the capitol of the Miles, but, upon seeing, and being disappointed by, the new crop of Overpharaohs coming from the Star Pharaoh foundries, he picked up his scythe, hitched up his cloak, and hopped on the first transport out to the front lines. He is on a mission to show these young whippersnappers with their wrist-mounted crossbows and hastily-applied eye makeup that there is more to being an Overpharaoh than popped collars and menacing poses. There is just no substitute for experience.

A 6 mm scale strike/air superiority fighter for small-scale wargames

Please note you are not able to sell prints of these files

The energies of the Hexcite are what grant the Star Pharaohs their sapience and ambition. Every set of Hexcite crystals installed in each Star Pharaoh resonates differently, however, and in the case of the Pharaoh Queen, the Hexcite granted her distinctly feminine personality and mannerisms. Though do not mistake her compassion for the pharaohs under her command for weakness - the same love a mother bear has for her cubs is the love that will tear those who threaten them limb from limb.

Great for adding terrain quickly without using many resources, and perfect for setting up tourney tables on a budget. The parts in this kit can be printed in less than 11 hours total print time and only 181 grams of filament.

Check our my other VMT models like the townhouse in the picture, on my patreon or my stores https://linktr.ee/leesedrenfort or https://www.patreon.com/LeesedRenfort

This model is to be printed in vase mode / spiralize contour mode with the orientation as the models are provided.
This model has been test printed with a 1.0 mm nozzle and a layer height of 0.12 mm or less.
Make sure to check your printing preview in cura after slicing, sometimes cura skips a layer or two when slicing in vase mode. If this happens just rotate the model a few degrees around the z-axis and slice again until its fine.
cura profile for an ender3 is also included in the download.
This models should print without supports flat on the build-plate with an FDM printer with a 1.0 nozzle in spiralize mode.
Models are scaled for 40mm gaming or also known as O gauge / 1:48 scale. They have been scaled to my preferences and re-scaling may be required to fit your particular needs.
Private Use Only Non Commercial No Derivatives NOTE: Do not under any circumstances share these files for free or commercially!

The Earth Federation Core Attacker in 1/144 is a fast fighter craft that doubles as an escape craft for giant mecha. Four nose machine guns backed up by hidden rockets make it a dangerous harassing unit. While you are free to rescale as you see fit, I've also included presupported versions at the aforementioned scales. Happy printing!

Notes:
The presupported Core Attacker fits comfortably on my original Mars 1, and if you increase the size to 1/100 it will still fit in a Mars 1, so happy printing!